<<Previous page ˆˆTop pageˆˆ This page Next page>> Click here for all of the manuals
Megasquirt-3: TunerStudio MS Lite Reference Guide SPK: Spark Advance The overall ignition advance. SPK: Spark Table 1 The looked up spark advance from ignition table 1. SPK: Spark Table 2 The looked up spark advance from ignition table 2. SPK: Spark Table 3 The looked up spark advance from ignition table 3. SPK: Spark Table 4 The looked up spark advance from ignition table 4. SPK: Traction retard The retardation to the timing due to traction control. Shaft rpm 1,2 Shaft speed in RPM. status1-8 These bitfield variables is a combination of binary bits about engine status. These are used to drive various status1 128 64 32 16 8 4 2 1 Full-RPM Synced Spark Table-sw Fuel Table-sw (Synclatch) RPM Synced Config Error Lost Data Need Burn status2 128 64 32 16 8 4 2 1 CL Idle Over Boost Spark Cut Flat Shift Launch Launch In N2O stage 2 N2O stage 1 status3 128 64 32 16 8 4 2 1 Launch On Seq. Shift Soft Limit 3-Step In Test mode 3-Step T Log Fuel Cut Status 4, 5 Typically only used by developers. The CEL system allows status5 to be used to record raw ADC counts or (c) 2014-8 James Murray 2018-07-08 Page 61/356 | |||