Search found 350 matches
- Tue Jan 28, 2020 12:45 pm
- Forum: Tuning
- Topic: lean when opening throttle effects autotune
- Replies: 3
- Views: 885
lean when opening throttle effects autotune
hey just wondering do any of you guys get this when you're doing a long tune with accel enrich off you get those lean spikes when shifting gears and the autotune richens up those sells to the max is there a filter or something i can use so autotune doesn't do thatt? or what do you guys do? i'm guess...
- Fri Jan 17, 2020 10:02 pm
- Forum: Tuning
- Topic: o2 placment question.
- Replies: 3
- Views: 535
o2 placment question.
hey dumb question. i have a turbo car. o2 sensor is maybe about 40 inches in the downpipe basically on the bend that goes under the car. my question is do you think putting it say, 18in from the turbo would give alittle bit more control with the ego corrections or not really. not really something im...
- Tue Oct 29, 2019 2:22 pm
- Forum: Megalogviewer
- Topic: Boost Target in psi
- Replies: 2
- Views: 1255
Re: Boost Target in psi
that worked thank you.
- Sun Oct 27, 2019 7:19 pm
- Forum: Megalogviewer
- Topic: Boost Target in psi
- Replies: 2
- Views: 1255
Boost Target in psi
hey quick question
what calculation do i need to put in MLV to view boost targets in PSI instead of kpa?
i
what calculation do i need to put in MLV to view boost targets in PSI instead of kpa?
i
- Sun Oct 27, 2019 6:04 pm
- Forum: Tuning
- Topic: tps % different while engine running.
- Replies: 2
- Views: 569
tps % different while engine running.
just a quick question tps is -4% in MLV and in tunerstudios it's 0%
has anyone seen this or na? WOT it's ok, 99.8, 99.9.
has anyone seen this or na? WOT it's ok, 99.8, 99.9.
- Fri Oct 25, 2019 5:27 pm
- Forum: Tuning
- Topic: very very random misfire
- Replies: 0
- Views: 872
very very random misfire
hey ms community my car has been on MS for years and years this is the first time i'm having this problem. at first it wouldn't even fire, flooding the engine, plugs fully wet. the problem was with the power spade connector on my coil relay. it pulled out partially and had a sloppy fit. Fixing that,...
- Sun Sep 08, 2019 4:25 pm
- Forum: Tuning
- Topic: Difficulty setting up closed loop boost control
- Replies: 10
- Views: 909
Re: Difficulty setting up closed loop boost control
even all the way down on the sensitivity it will go crazy?
i haven't looked at your file yet but mine would go crazy the more sensitivity i put in
but you have already put the sensitivity all the way down and same exact thing ya?
i haven't looked at your file yet but mine would go crazy the more sensitivity i put in
but you have already put the sensitivity all the way down and same exact thing ya?
- Wed Sep 04, 2019 8:13 pm
- Forum: Tuning
- Topic: Boost controller not following target
- Replies: 12
- Views: 1240
Re: Boost controller not following target
hey guys just thought i'd update this thing. Turns out to be the tuning somehow. i put it on basic and used to slider to bring it waaaaay back to 51 on the sensitivity. seems to follow targets pretty good now. hope this helps some future people. https://live.staticflickr.com/65535/48680855221_3050fc...
- Wed Sep 04, 2019 3:42 pm
- Forum: Tuning
- Topic: EBC dc question.
- Replies: 3
- Views: 346
Re: EBC dc question.
thanks man i thought so.
if i got 10psi spring would that only give me an extra 5psi you think?
i'm thinking that's how it works but maybe not.
if i got 10psi spring would that only give me an extra 5psi you think?
i'm thinking that's how it works but maybe not.
- Mon Sep 02, 2019 11:06 am
- Forum: Tuning
- Topic: EBC dc question.
- Replies: 3
- Views: 346
EBC dc question.
hi quick question is a high DC on the EBC does that mean that my springs is beginning to max out? i think i have a 5psi spring and i'm at 20psi right now DC is pretty stable and keeps about 95% does that mean it has 5% left until it basically tries to keep the wastegate fully closed? just wondering ...
- Wed Aug 21, 2019 6:06 pm
- Forum: MSDroid (unsupported)
- Topic: Auto Tune option
- Replies: 6
- Views: 9202
Re: Auto Tune option
does the TS mobile have autotune?
- Sat Jul 27, 2019 7:36 pm
- Forum: Tuning
- Topic: MAT air density table 50%
- Replies: 5
- Views: 524
Re: MAT air density table 50%
btw for you guys looking for a fix going from a normal tuned afr you spend some time on and leaning out a full point leaner driving around these hot summer days. here's a good fix. i promise. found a translation to that 50% slider. haven't used it yet but this guy is legit. https://www.miataturbo.ne...
- Sat Jul 27, 2019 4:59 pm
- Forum: Tuning
- Topic: Need help understanding ASE taper
- Replies: 26
- Views: 4853
Re: Need help understanding ASE taper
well ya i think that's what ASE is exactly for hot starts
- Sat Jul 20, 2019 8:07 pm
- Forum: Tuning
- Topic: Need help understanding ASE taper
- Replies: 26
- Views: 4853
Re: Need help understanding ASE taper
i'm not an expert or anything but i use ASE to battle the horrible hot start leanness you do after you
park in day time and then go back and tune cold start in the morning.
park in day time and then go back and tune cold start in the morning.
- Wed Jul 17, 2019 9:26 pm
- Forum: Tuning
- Topic: MAT air density table 50%
- Replies: 5
- Views: 524
Re: MAT air density table 50%
matt on your air density table tuning is it best to let the car idle for a while getting the sensor totally heat soaked to lean out before doing this or does it matter? if i parked on the side of the road for like 15min get the sensor super hot and let it rip should i lug it in 3rd and just do a sin...
- Tue Jul 16, 2019 5:52 pm
- Forum: Tuning
- Topic: MAT air density table 50%
- Replies: 5
- Views: 524
MAT air density table 50%
hey gurus i had a firmware version that had a slider to set % for air density and setting it to 50% worked beautify. hot starts where great. cold nights it wasn't rich as heck or hot days it wasn't super lean. This was a real struggle with the stock table, as it is currently again. but at 50% it was...
- Tue Jul 16, 2019 12:42 pm
- Forum: Tuning
- Topic: MAP hose with a "T" or not...
- Replies: 15
- Views: 3622
Re: MAP hose with a "T" or not...
i have mine hooked joined to the FPR as well which is not ideal but haven't seen a real problem from it.
That's funny you bring up the mig tip i've seen people posting about that years ago back in the ms1 days.
thought it was janky but seems like it still works.
That's funny you bring up the mig tip i've seen people posting about that years ago back in the ms1 days.
thought it was janky but seems like it still works.
- Sat Jul 13, 2019 5:09 pm
- Forum: Tuning
- Topic: Boost controller not following target
- Replies: 12
- Views: 1240
Re: Boost controller not following target
alright man thanks i'll try it see if that's it.
but just to be sure you guys don't think the back pressure opening up my wastegate valve?
i think its a 8psi spring.
but just to be sure you guys don't think the back pressure opening up my wastegate valve?
i think its a 8psi spring.
- Tue Jul 09, 2019 9:17 pm
- Forum: Tuning
- Topic: Boost controller not following target
- Replies: 12
- Views: 1240
Re: Boost controller not following target
Got my clutch in finally runs tits. BUT still doing it. Did a pressure test to 30psi. bov isn't leaking. wastegate isn't leaking. i plugged the bleed port on the EBC with my finger and you can hear it closing super fast. Very responsive. could it be that at those rpms / psi the backpressure is pushi...
- Mon Jun 03, 2019 10:35 pm
- Forum: Tuning
- Topic: Boost controller not following target
- Replies: 12
- Views: 1240
Re: Boost controller not following target
EBC is using the top port. i'll do a boost leak test when i get it back together maybe next weekend. it's a authentic tial Q. i really hope it's not that... $$$ Had to take the clutch out it is totally fried. Does ok but when it gets alittle hot it will let go. can you see why? :lol: btw. kevlar dis...