Megasquirt Support Forum (MSEXTRA)

Hi Phil,
thanks for replay.
I have try and work, but is only for file in your site? is possible use ProjectsDirPath()?


Regards
Cristian

Hi
Is possible implement the immage (gif, jpg....) in dialog form?
Now in file INI we can divide the dialog form in panel (east, west....). My idea is insert "image" (nomefile) east west....
(sorry for my english)

Regards
Cristian

I confirm the problem.
The update and restart are successful, but if I close tunerstudio, it won't reopen again
Regards
Cristian

I have reload firmware alpha2 and now work. I don't know what happened in my previous update. But I have other question. ALS with DBW enabled, with dbw enabled it doesn't follow tables and As soon as I touch the gas pedal, the strategy switches off automatically. Is normal with DBW? I attach video a...

In my first test, CANIN not work well in alpha2. I have test canin in ALS activation and burnout activation but no work. It is always active
Now reload 1.5.2 and retray..

As read in other posts on the forum I tried to change the tensioner. Same problem. I don't understand why I don't get any response or help from the developers. I have few alternatives left ... either I try to mount an external tooth whell system hoping that the variators work or I will have to chang...

Other clarification, with Ecu stock the engine start always....

Thanks for replay Manu. If your last photo is correct for 350z, yes there is mechanical problem ....

Other consideration:
I see in the forum this for VQ35DE: But I think 350Z have inverted crank signal (I think the principal problem is this)
This is my log crank&cam I am using the same circuit for crank and cam

I update the post. I understand that MS expects the cam alignment to the right of the missing tooth. With the RISING-NORMAL setting this does not start, but nevertheless sometimes the motor manages to start due to the alignment of some teeth (even if wrong). When the engine starts, everything seems ...

Hi guys, I did further tests. I have the feeling that the engine only starts if it stops in a certain position. I did a lot of testing between falling rising inverting or normal. I can't figure out if I have a hardware problem in the engine (I don't think because the Cranck & Cam log is correct ...

Is Add on for ms3. Is interface for CAN fiat 29bit and DBW.
I use MS3.

Hi, I have make my expansion and I have problem with passtrough. Sometime I see wrong value in my tune data. I have 2 page. The first page is 8bit value. Second page is 16bit. Sometime is all ok, but sometime the page 16bit (only page 16bit), send me wrong value and only 8bit. I see this error with ...

Today I have make other test.
Attach new composite log

I dont understand the difference from composite log start and no start.
When no start if I not turn off ecu and restart, the engine never starts and in tuner studio I see fixed rpm.

I attach log Crank&Cam, composite log when engine run, log engine run and tune file msq (only for first start)


Regards

Cristian

I think the signal is correct because I have test left and right sensor. The signal is the same. I can make composite log in log crank and cam.
When the engine start run Well. Vvt work without problem

Hi, I have problem during crank. Sometimes the car start, sometimes the engine no start for no sync (composite log is ok), sometimes the engine have sync but no start for for wrong fase. If start, is ok, but only in wastedcop. Cop on plug never start… I have try all configuration, rising, falling, f...

I attach log and video for AC problem
https://www.youtube.com/watch?v=SrfdxKHciTk

At the moment I have only tune.
With this setting when I turn on AC in gauge idle rpm target I see increase 200 rpm.
This days I can try in other car

I think there is bug with idle target with AC. "IDLE-UP min RPM" increase Always 200 rpm. Change the value not have effect


regards Cristian