Megasquirt Support Forum (MSEXTRA)

MS2tester wrote:Hook 2 ignition driver outputs to the same coil through a diode!?

No,2 driver to One double MSD coil(two separate Channel)

Inviato dal mio motorola one zoom utilizzando Tapatalk

MS2tester wrote:You might have to replug your ignition coils in a similar way so A, C, E, G giving 180 dgr interval

I have 4 injector but 2 coil(wasted Spark)

Inviato dal mio motorola one zoom utilizzando Tapatalk

MS2tester wrote:I believe setting to a V8 seqential could solve your problem using injector outputs A, C, E, G
Setting ignition to wasted spark

you say it can work?

Inviato dal mio motorola one zoom utilizzando Tapatalk

04turbopony wrote:did one of your injector drivers burn up/ short on the ms3x?

yes, unfortunately it ruined a track and now I would like to directly bypass that driver without trying to fix the situation


Inviato dal mio motorola one zoom utilizzando Tapatalk

You can't choose which drivers are used. This is determined by the firmware from your number of cylinders. You could 'cheat' and use staged injection (with parameters that would make it not really staged) but that would mean you would be using all 8 drivers with only 4 of them being actually used. ...

Hi, information. Is there a possibility (via firmware) to change the output channel of the injectors? (MS3X) I mean, I have a problem with the D channel driver and I would like to use the F Driver (which I don't use, but it works,i have 4 cylinder). Thanks P.S. Sorry if the question has already been...

Has anyone created a project to be able to connect the megasquirt to RaceChrono(popular app for trackday) via can? https://racechrono.com/forum/discussion/1746/my-first-build-can-bus-and-gps-through-bluetooth-le I created the HW, the problem is the code, which unfortunately I'm not good at writing i...

Hi guys, it's been a long time since this post, are there any news?
I would like to mount a MIcrosquirt v3 on a Daihatsu Charade 3cyl Turbo.
the ignition setup is this


24/3.
what is the right configuration in tunerstudio?

Has anyone used one of these? Seems like the mini USB is a nice feature for power, I don't know how you would change the baud rate with only the one serial connector though?? http://www.ebay.com/itm/RS232-5V-Bluetooth-Serial-Adapter-Communication-Master-Slave-Module-Mini-USB-/390857482156?hash=item...

what kind of changes should be done ?

I have a problem. Ms2 use of the HC - 06 Bluetooth module and works well , as both use USB adapter PL2303 that ch340 and everything works fine . Microsquirt instead of the adapter it works only pl2303 , bluetooth module HC - 06 and the USB adapter ch340 don't work. why? What is the difference betwee...

one thing is to connect to the bluetooth controller , but not necessarily be connected to the MegaSquirt , is how to connect to a router but not the internet .

you try to connect with laptop(tunerstudio)?

nice idea

2 features very cool to add would the autotune of Accell enrich and time of injection angle

impossible?

There is a possibility to enter in the code of Ms2 , the function that is in the ' MS3 " batch fire During crank" ?
is very useful , but I do not know if it is used on MS2 .

post your msq and composite log.

I have Lancia delta Evo2 work fine with MS2 and all IAW marelli sensor.

My car have a VR sensor on crank and hall sansor on cam.(only the IAW p8 have hall sensor on cam,the other IAW have a VR senors on cam and crank)

The IAW decoder if MS2 work fine.

With the ini file for Megasquirt 2 ,Msdroid return at work perfectly.

thank you.