Megasquirt Support Forum (MSEXTRA)

LT401Vette wrote: ↑Tue Apr 23, 2024 9:35 am Install the beta and do an auto update to 3.2.02.02

https://www.efianalytics.com/TunerStudio/beta/

Install the beta and do an auto update to 3.2.02.02

I am seeing these issues also since latest update. I normally use a toggle on my dash and rpm > 200 to start the log and the the switch && rpm < 400 to stop and mine doesn’t ever stop logging. I don’t have any files to upload at the moment I just jumped on here to dig around. Tonight I set ...

We have one other user with a mac that had the same issue.
Apparently there is a compatibility issue with the JSSC 2.9.6 library.
The current beta has rolled back to 2.9.4.
That seems to resolve the issue.

I will be promoting that to stable on pretty short order.

I see what triggers that error is when start logging gets triggered twice together. I added protection, but I think it is that rpm = 0 that let that happen. I think your goal there is to pretty much log all the time and have it stop logging when you key off. To do that try this expression for stop l...

I did just manage to reproduce that error in your screenshot.

I see where it is starting a log, then stops immediately. Have you tried setting the stop to Manual? rpm = 0 isn't really good because while cranking you could go over 50, then get a 0. I will try that for testing. Assuming that works what is a better solution for automation? My assumption was if R...

I see where it is starting a log, then stops immediately.

Have you tried setting the stop to Manual?
rpm = 0 isn't really good because while cranking you could go over 50, then get a 0.

Interesting..
I must have forgot to up the 3.1 to 3.2 in the installer script

It would take me adding a new Gauge style.

It is auto update only right now. So if you install any beta then take the update you will get it.

I believe these to be resolved in beta 3.2.02.01

Thanks to your AppDebug, I see the problem. It is related to this one: https://www.msextra.com/forums/viewtopic.php?t=80310 Interesting that macOS is declaring too many files, but it is Opening Sockets that is causing the failure. When it fails to open the socket, it is going into a hard loop repeat...

I tried this on a different laptop and it does the same thing (also linux). The TunerStudioAppDebug.txt file is growing with about 290 MB per minute so I tried putting debug=off in the TunerStudio.properties file but that made the battery drain even worse (although the file was not made anymore). I...

Those are a different sort of gauge.

Which Gauge Style are you using? The Asymmetric Sweep? You can change it's shape and flow in the Properties Dialog by changing "Face Angle / Fill" "Face Start Angle / Height" "Needle Start Angle" "Sweep Angle" If you want it to go straight vertical, then switc...

Rename the project folder. TS will figure it out.

Supports Gif, but it sounds like you want an animated GIF.

Yes, something would need to trigger the repaints. So while connected to an ECU it may just animate.

The beta I posted yesterday rolled jssc back to 2.9.4

The only smoothing TS does is to the needle movement. The numbers are what is received from the ECU or what is calculated from data received from the ECU.

How are you converting ADC6 to Fuel Pressure?

When you say over CAN, is that using Dash Broadcasting?