BMW 525, 1jzgte

General talk about successes. See older information on MSRUNS forum.
Post Reply
nathaninwa
Super MS/Extra'er
Posts: 2636
Joined: Tue Sep 14, 2004 4:17 pm
Location: Aberdeen, Wa

BMW 525, 1jzgte

Post by nathaninwa »

Had a hand in getting this gem up and running on MS3Pro. Be a while before we hit the Dyno, but the testing so far shows promsing results.

1jz, 6262, HKS 264, intake.

Image

Image

Image
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
Suprazz
Master MS/Extra'er
Posts: 499
Joined: Mon Jan 22, 2007 7:58 pm
Contact:

Re: BMW 525, 1jzgte

Post by Suprazz »

wow very nice!!!
Best looking and most advanced CAN-bus gauge
Toyota Supra 7MGE, 7M-GTE and 1JZ-GTE Plug and play ECUs: http://www.perfecttuning.net
Serial to Bluetooth or Serial to WiFi
DIYAutotune Canadian, EFI Source and ECUMaster reseller!
nismoautoxr
Super MS/Extra'er
Posts: 2631
Joined: Sun May 29, 2011 10:28 am
Location: birmingham ,Alabama. U.S.A.

Re: BMW 525, 1jzgte

Post by nismoautoxr »

man that is clean. Very nice attention to detail.
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: BMW 525, 1jzgte

Post by Matt Cramer »

Very clean install.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
tutuur
Experienced MS/Extra'er
Posts: 288
Joined: Tue Nov 06, 2012 5:27 am

Re: BMW 525, 1jzgte

Post by tutuur »

Looks very clean indeed! Post some pictures of your 940 man!
AbatelliCristian
Super MS/Extra'er
Posts: 855
Joined: Sun Oct 10, 2010 6:33 am

Re: BMW 525, 1jzgte

Post by AbatelliCristian »

very very good....
nathaninwa
Super MS/Extra'er
Posts: 2636
Joined: Tue Sep 14, 2004 4:17 pm
Location: Aberdeen, Wa

Re: BMW 525, 1jzgte

Post by nathaninwa »

tutuur wrote:Looks very clean indeed! Post some pictures of your 940 man!


Heres my link. http://www.msextra.com/forums/viewtopic ... 04&t=49355 I have a wee bit more power now with some S1 cams installed, and at 90%dc on some 1220cc injectors.
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
Yoeddynz
Helpful MS/Extra'er
Posts: 98
Joined: Tue Feb 05, 2013 3:15 am

Re: BMW 525, 1jzgte

Post by Yoeddynz »

Sweet install! Nice and tidy- how I like them. Top work.
linktr.ee/yellowhammerworkshop
aznmagic
Helpful MS/Extra'er
Posts: 36
Joined: Wed Jul 31, 2013 6:56 pm

Re: BMW 525, 1jzgte

Post by aznmagic »

Now i know how to make my intake manifold....thanks :)
nathaninwa
Super MS/Extra'er
Posts: 2636
Joined: Tue Sep 14, 2004 4:17 pm
Location: Aberdeen, Wa

Re: BMW 525, 1jzgte

Post by nathaninwa »

aznmagic wrote:Now i know how to make my intake manifold....thanks :)
Its just a little big for my liking, but I didn't have the runner length to taper them into the plenum like on my 2j. The trick is getting the oval to round transition smooth so the internal velocity stacks are easier to form.

All in all, this is a really well running engine, and it loves 25psi on ethynol.
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
ZenitramNaes
Helpful MS/Extra'er
Posts: 109
Joined: Sun Dec 15, 2013 2:35 pm
Location: Tallahassee, Florida

Re: BMW 525, 1jzgte

Post by ZenitramNaes »

Wow, wow, wow. Fellow e34 owner (turbo 535i) very nice job!
'89 535i/5 Holset WH1E turbo
Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum/sh ... rt-content
Post Reply