Over Run not filtering?

Questions specific to Megalogviewer

Moderator: LT401Vette

Post Reply
Mario
Master MS/Extra'er
Posts: 409
Joined: Sun Jan 30, 2005 11:13 pm
Location: Monroe, Wa.
Contact:

Over Run not filtering?

Post by Mario »

Can someone have a look at this log and give me a second set of eyes on it.

Running MLV 3.4.04 on an MS2 V3 V3.2.5

When I run VE analyzer I can't get it to filter the Over Run Events and there are a few. I don't even see status3 triggering? Any ideas on this??
CurrentTune Adjusted 3.msq
2014-04-23_15.37.18.msl
1967 Beetle My test mule
The Dub Shop
Facebook
Megasquirt for life!
Mario
Master MS/Extra'er
Posts: 409
Joined: Sun Jan 30, 2005 11:13 pm
Location: Monroe, Wa.
Contact:

Re: Over Run not filtering?

Post by Mario »

My ghetto work around filter for now

[PW]<1.5||[AFR]>20||[TP]<5
1967 Beetle My test mule
The Dub Shop
Facebook
Megasquirt for life!
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Over Run not filtering?

Post by LT401Vette »

There is nothing wrong with the work around. I have used [PW] == 0 also.

You may also want to add some delay too, so it ignores a few records after the fuel comes back on:

([PW] == 0 && [PW-1] == 0 && [PW-2] == 0 )
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Mario
Master MS/Extra'er
Posts: 409
Joined: Sun Jan 30, 2005 11:13 pm
Location: Monroe, Wa.
Contact:

Re: Over Run not filtering?

Post by Mario »

Thanks Phil! Since I didn't know how to delay, that's why the pw number isn't zero :lol:

Is this a problem then and not just me or my machine?
1967 Beetle My test mule
The Dub Shop
Facebook
Megasquirt for life!
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Over Run not filtering?

Post by LT401Vette »

Hmm, If you check and uncheck the "Disable Overrun Filter" under specialized Options, do you get the same results?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Mario
Master MS/Extra'er
Posts: 409
Joined: Sun Jan 30, 2005 11:13 pm
Location: Monroe, Wa.
Contact:

Re: Over Run not filtering?

Post by Mario »

In all this time I have never honestly seen that menu... Overlooked it I guess. It does make a difference when I use it or not. It seems to still try and adjust to much on the overrun area.

Is this also tied into the lambda delay table?
1967 Beetle My test mule
The Dub Shop
Facebook
Megasquirt for life!
Post Reply