Page 1 of 1

Issue with ECU field definitions on MS3 Batch Injection

Posted: Wed Mar 07, 2012 2:57 pm
by sdezego
Running 3.06

I am Logging MS3 and am NOT running sequential injection currently. When set to Auto detect, I get errors on instantMPG as well as other calcs because ML appears to be assuming I am running sequential injection. Tried manually setting field ECu definitions to Megasquirt, but that throws and GEGO error when trying to load VE analyze (I am assuming because they are not MS3 defs). Thoughts?

Also, The instant MPG calcs do not appear to be taking into consideration Fuel Cut. I guess I could add a range limit. Thoughts? I can post a log if necessary.

Thanks,
Shawn

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Wed Mar 07, 2012 3:18 pm
by sdezego
Using Batch Alternating, not full Batch.

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Wed Mar 07, 2012 6:08 pm
by jsmcortina
Autodetect what?

James

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Thu Mar 08, 2012 7:50 am
by LT401Vette
jsmcortina wrote:Autodetect what?

James
Auto detect Field Mappings I assume..
As the Log Field naming changes between firmwares and what not, MegaLogViewer 3.0 by default looks at the header names in each log at open and maps it to a field map so that all the calculated fields work.

sdezego,
Can you post a short data log just to be sure I am working with the same fields as you.

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Thu Mar 08, 2012 8:33 am
by sdezego
Sure, here is a log.

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Sat Mar 10, 2012 6:37 pm
by sdezego
Let me know if there is anything else I can provide or help in any way.

Regards,
Shawn

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Sun Mar 11, 2012 8:03 am
by LT401Vette
Nope, that did it...

I created a new Field map for non sequential MS3 1.1+. So it will be in the next release.

That formula seems Ok currently if you switch from Manual to MegaSquirt, but then ego_corr is wrong.

Re: Issue with ECU field definitions on MS3 Batch Injection

Posted: Tue Mar 13, 2012 6:21 pm
by sdezego
Ok, thanks!