Megalog Viewer Status Annunciators
Moderator: LT401Vette
-
- Helpful MS/Extra'er
- Posts: 63
- Joined: Tue Dec 03, 2013 12:49 am
Megalog Viewer Status Annunciators
In the bottom right of the screen, there are 8 annunciators beginning with CRANK:N. Is there a way for me to customize and add others, such as Closed Loop Idle:ON?
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Megalog Viewer Status Annunciators
No, there currently is not. That is on the todo list though.DNMakinson wrote:In the bottom right of the screen, there are 8 annunciators beginning with CRANK:N. Is there a way for me to customize and add others, such as Closed Loop Idle:ON?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sat Mar 07, 2015 4:46 pm
Re: Megalog Viewer Status Annunciators
Did this ever get added?
1990 Mustang: MS3Pro Gen 1, 306ci, 72mm turbo, 80lb inj, 36-1 + Cam Sync + D585 coils, World heads, TFS1 cam, GT40 intake, auto, Speed Density
1987 Mustang: MS2v3.57, direct coil control, MSD VR Dizzy, SBE, Weiand 174,190cc heads, F303 cam, TBI w/ (4) 160lb inj, GT500 MAF
1987 Mustang: MS2v3.57, direct coil control, MSD VR Dizzy, SBE, Weiand 174,190cc heads, F303 cam, TBI w/ (4) 160lb inj, GT500 MAF
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Megalog Viewer Status Annunciators
Yes it did, quite some time back. Fields that are logged as binary types (On/Off, Active/Inactive, High/Low, etc) are displayed 1st in the lower readouts and colored green when the state is true.
I don't think any of the ini files have been updated to log in that format though.
If you add any binary type fields in TunerStudio's Custom custome Channel Editor or in a custom.ini they will show up though.
I don't think any of the ini files have been updated to log in that format though.
If you add any binary type fields in TunerStudio's Custom custome Channel Editor or in a custom.ini they will show up though.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html