VE Table

Questions specific to Megalogviewer

Moderator: LT401Vette

Post Reply
panther
MS/Extra Newbie
Posts: 15
Joined: Sun Dec 22, 2013 10:58 pm

VE Table

Post by panther »

i notice that the axis values for the ve table in Mega log veiwer are not same as tuner studio.
Is this because i am using MegaLogViewer MS Lite3.4..04 :shock:
nathaninwa
Super MS/Extra'er
Posts: 2637
Joined: Tue Sep 14, 2004 4:17 pm
Location: Aberdeen, Wa

Re: VE Table

Post by nathaninwa »

Just a thought, did you import your tune, or the current tune being used?
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
LT401Vette
Super MS/Extra'er
Posts: 12698
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: VE Table

Post by LT401Vette »

Lite wouldn't have anything to do with it.

I just opened your msq in both and for VE Table1, advanceTable1 and AFR Table1 all have the same values on the X & Y axis.
Are you looking at one of the other tables?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
panther
MS/Extra Newbie
Posts: 15
Joined: Sun Dec 22, 2013 10:58 pm

Re: VE Table

Post by panther »

I will to explain myself a bit better.
2014-01-04_17.17.18Jacks No2.msq The Ve fuel table in the MSQ
the RPMs range from 900 - 5200.
2014-01-04_19.08.41trigger@67.msl The fuel table in Megalog viewer
the RPMS range from 700 - 5500.

Have i got import the MSQ into Megalog viewer??

Cheers
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: VE Table

Post by jsmcortina »

Yes, you need to open the MSQ. There's a button right under the VE table.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply