Logging SpareADC
Moderator: LT401Vette
Logging SpareADC
Is it possible to log spareADC?
I've set up my MS3 with another GM air temp sensor connected to spareADC, customised my dash with tunerstudio and loaded it to shadowdash. My phone displays the real time data coming from the temp sensor, but I can't find spareADC in megalogviewer.
I've set up my MS3 with another GM air temp sensor connected to spareADC, customised my dash with tunerstudio and loaded it to shadowdash. My phone displays the real time data coming from the temp sensor, but I can't find spareADC in megalogviewer.
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Logging SpareADC
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Logging SpareADC
I've done all of that, I just can't find the values in my data logs. It doesn't appear in the drop down boxes. Would it be labled spareADC or something else in log viewer?
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Logging SpareADC
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Logging SpareADC
MSQ attached
Re: Logging SpareADC
log attached
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Logging SpareADC
You need to actually do what this page says and configure an input.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Logging SpareADC
I did do that, I can see the values the sensor is reading on my phone's display in shadow dash.
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Logging SpareADC
The MSQ and datalog you posted do not have that enabled.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Logging SpareADC
Managed to get it to work.
I had to manually replace the CurrentTune file stored on my phone with the latest one from when I installed the additional sensor. I thought the ShadowDash app would have 'grabbed' this from the megasquirt when it connected. I assumed it was all working fine because the phone was obviously receiving the sensor data and displaying it on the screen, just not logging it. It's a shame because I just got back from a three-day drive and it would have been really useful to see the data. I think I vaguely recall a pop-up message when I first started using ShadowDash warning about having to replace the CurrentTune files.
I had to manually replace the CurrentTune file stored on my phone with the latest one from when I installed the additional sensor. I thought the ShadowDash app would have 'grabbed' this from the megasquirt when it connected. I assumed it was all working fine because the phone was obviously receiving the sensor data and displaying it on the screen, just not logging it. It's a shame because I just got back from a three-day drive and it would have been really useful to see the data. I think I vaguely recall a pop-up message when I first started using ShadowDash warning about having to replace the CurrentTune files.