An idea: There should be an easily accessible way to show alle the data points taken away by a filter. If, say, you find that there is a fuelling problem on warmup since all the trouble spots go away when the "Cold" filter is applied - there should be an equally accessible way to show only the offending data points, effectively inverting the filter.
Waddayathink?
Feature request: invert filter in scatter plot view
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 884
- Joined: Sat Apr 30, 2011 12:34 pm
- Location: Sandefjord, Norway
Feature request: invert filter in scatter plot view
Joachim
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Feature request: invert filter in scatter plot view
You can create another filter with a !([filter]) around it, but it wouldn't be a big deal to have the app do it for you without having to make and maintain additional filters.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Super MS/Extra'er
- Posts: 884
- Joined: Sat Apr 30, 2011 12:34 pm
- Location: Sandefjord, Norway
Re: Feature request: invert filter in scatter plot view
That would work, but it would be a bit cumbersome. I think a single "Invert selection" á la Photoshop would be a better solution.
Implement at will.
Implement at will.
Joachim
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Feature request: invert filter in scatter plot view
The filter already works backwards to what I was expecting.
I originally expected it to be a filter in (include), but it is currently a filter out (exclude.)
James
I originally expected it to be a filter in (include), but it is currently a filter out (exclude.)
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".