Hi,
I would like to change the dot size in the scatter plot, ist this possible?
I have short full throttle logs and would like to get a power curve. How many dots are set. Is it one per second, or just the datarate I set up? I Would like to have many many dots so I get a nice full throttle curve, otherwise it is very difficult to recognise the line.
Thanks
Julian
MLV questions about scatter plot
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: MLV questions about scatter plot
Yes the dots get bigger with the number of hits to it.
So if you have a higher data rate they will get bigger and cover things better.
It would be good to have a user setting to increase the dot size too.
So if you have a higher data rate they will get bigger and cover things better.
It would be good to have a user setting to increase the dot size too.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html