Oddly this works in Windows MLV 4.0.07
I don't see AFR anywhere in the dropdown menu; although I can select O2 volts.
I see AFR until the load completes and then AFR is replaced with blank selection
Not sure what you want AFA upload; attached log like all my MS1 logs does it.
AFR is fine on MS2 and Ubuntu installation; it's only when I calculate from O2 data.
I'm not sure when this stopped working; I don't see a lot of MS1 anymore but had 2 on Saturday. One 029Y3 format and one HR10D
Thanks!
MLV 4.0.07 Ubuntu; no calculated AFR with MS1
Moderator: LT401Vette
-
- Super MS/Extra'er
- Posts: 3653
- Joined: Fri Apr 02, 2004 8:40 pm
- Location: Virginia Beach, VA
- Contact:
MLV 4.0.07 Ubuntu; no calculated AFR with MS1
Peter Florance
PF Tuning
81 BMW Euro 528i ESP Car
60-2 Wheel LS2 Coils, Low Z Inj
Co-Driver 1999 BMW E46 DSP car.
PF Tuning
81 BMW Euro 528i ESP Car
60-2 Wheel LS2 Coils, Low Z Inj
Co-Driver 1999 BMW E46 DSP car.