>4 Graphs is buggy
Moderator: LT401Vette
>4 Graphs is buggy
Hi Phil,
When enabling over 4 graphs, graphs 5,6,7,8,etc only have one item selection box, and when an item is displayed the graph color doesnt match.
Ie:
When enabling over 4 graphs, graphs 5,6,7,8,etc only have one item selection box, and when an item is displayed the graph color doesnt match.
Ie:
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
Re: >4 Graphs is buggy
Argh, sorry, wrong forum!
Can someone please move this thread?
Can someone please move this thread?
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
-
- Super MS/Extra'er
- Posts: 12697
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: >4 Graphs is buggy
Yes, that is easily reproducible.
I will fix.
I will fix.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: >4 Graphs is buggy
Was this meant to be fixed in 4.0.12?
It doesn't seem to be.
And a quick question/request instead of starting a new thread.
What is the status of support for 128 byte logs?
Thanks
It doesn't seem to be.
And a quick question/request instead of starting a new thread.
What is the status of support for 128 byte logs?
Thanks
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
-
- Super MS/Extra'er
- Posts: 12697
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: >4 Graphs is buggy
Nope not in 4.12. That is in the next release.
That will be in the betas for TS 3.0
For MS3 SD Logs?What is the status of support for 128 byte logs?
That will be in the betas for TS 3.0
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: >4 Graphs is buggy
Okie dokie.
Im looking forward to the fix and especially the 128 byte log support.
Thanks
Im looking forward to the fix and especially the 128 byte log support.
Thanks
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
Re: >4 Graphs is buggy
Hey Phil,
I did the update today.
All looked good to begin with... then i removed an item from the 3rd graph, and all the colors went out of whack.
I did the update today.
All looked good to begin with... then i removed an item from the 3rd graph, and all the colors went out of whack.
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
Re: >4 Graphs is buggy
And....
Loading a quick view that doesnt use graphs >4 doesnt clear out the graphs >4.
Ie, if you have an item loaded into graph5, then use a quick view, the item on graph5 remains.
Loading a quick view that doesnt use graphs >4 doesnt clear out the graphs >4.
Ie, if you have an item loaded into graph5, then use a quick view, the item on graph5 remains.
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.