Pause marks at bottom of screen
Moderator: LT401Vette
Pause marks at bottom of screen
What happened to the marks at the bottom of the screen, every time I stopped the engine and started again?? Don't know how to get them back, have to run through the complete file to see where I made my stops.
1992 Corvette C4, modified 397ci engine using MS3X, CNP, 36-1 t-wheel
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Pause marks at bottom of screen
Hmmm, it looks like I broke em somewhere along the line.
I'll have to fix that.
I'll have to fix that.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Experienced MS/Extra'er
- Posts: 276
- Joined: Sat Mar 30, 2013 3:27 pm
- Location: MA, USA
Re: Pause marks at bottom of screen
Does this also affect the "Mark" (spacebar) identifiers?
1990 Nissan 240sx / SOHC KA-T / DIYPNP
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Pause marks at bottom of screen
Yes... They show on the main graph, it is on the status bar at the bottom the red lines are missing. So you can't see where to jump too.BigLou240sx wrote:Does this also affect the "Mark" (spacebar) identifiers?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Experienced MS/Extra'er
- Posts: 276
- Joined: Sat Mar 30, 2013 3:27 pm
- Location: MA, USA
Re: Pause marks at bottom of screen
Cool, was wondering if that was a nuance of my install and will look forward to a fix down the road! Thanks PhilLT401Vette wrote:Yes... They show on the main graph, it is on the status bar at the bottom the red lines are missing. So you can't see where to jump too.BigLou240sx wrote:Does this also affect the "Mark" (spacebar) identifiers?
1990 Nissan 240sx / SOHC KA-T / DIYPNP
Re: Pause marks at bottom of screen
The pause marks are back again. Thanks Phil...
The only thing left now is my problem with HP & TQ. See my thread
Hope you can solve this problem as quickly as you did here.
Thanks
Arnold
The only thing left now is my problem with HP & TQ. See my thread
Hope you can solve this problem as quickly as you did here.
Thanks
Arnold
1992 Corvette C4, modified 397ci engine using MS3X, CNP, 36-1 t-wheel