Hi all,
Phil, I have found an problem when I need to modify the "Hits" scale on the Z Axis to have a better colours distribution on the filled graph.
If I remove the tick from "Use Default" box and put my own numbers, simply nothing happens.
RPM and other fields seems to work as expected.
Is there an solution to this?
Thank you.
Cheers,
Fabio.
Scatter Plots: Hits Z Axis manual Scale problem
Moderator: LT401Vette
-
- Experienced MS/Extra'er
- Posts: 216
- Joined: Sat Feb 07, 2009 12:17 am
- Location: Aosta - Italy
Scatter Plots: Hits Z Axis manual Scale problem
Yamaha V-Max V4 paired odd-fire 1200cc engine - ITB - COP
MS2/Extra Pre 3.4 beta 11
Sequential spark & fuel - ITB Algorithm
MS2/Extra Pre 3.4 beta 11
Sequential spark & fuel - ITB Algorithm
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Scatter Plots: Hits Z Axis manual Scale problem
For hits it wouldn't make a difference as Hits isn't actually a field... I'll have to look at putting handling in for that...
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Experienced MS/Extra'er
- Posts: 216
- Joined: Sat Feb 07, 2009 12:17 am
- Location: Aosta - Italy
Re: Scatter Plots: Hits Z Axis manual Scale problem
I don't know why the maximum value associated to Hits on the Z axis is quite off. I mean that while on the plot (filtered) I see values like 1902, the upper side of the Z axis (on the right of the screen) is only 187, so a wide range of Hits are painted with the same red color, making difficult to understand the situation.
Fabio
Thank you Phil.LT401Vette wrote:...I'll have to look at putting handling in for that...
Fabio
Yamaha V-Max V4 paired odd-fire 1200cc engine - ITB - COP
MS2/Extra Pre 3.4 beta 11
Sequential spark & fuel - ITB Algorithm
MS2/Extra Pre 3.4 beta 11
Sequential spark & fuel - ITB Algorithm
-
- MS/Extra Newbie
- Posts: 4
- Joined: Mon Aug 15, 2016 9:11 pm
Re: Scatter Plots: Hits Z Axis manual Scale problem
Hi Phil,
Is there a fix for this yet? I am in need of looking at data point frequency and it currently does not scale properly from what I can tell.
Thanks,
Matt
Is there a fix for this yet? I am in need of looking at data point frequency and it currently does not scale properly from what I can tell.
Thanks,
Matt
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Scatter Plots: Hits Z Axis manual Scale problem
The scale is still linear. If you have many hits on 1 pixel it will skew the scale.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html