Low Application Error - Mac
Moderator: LT401Vette
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Aug 08, 2011 11:03 am
Low Application Error - Mac
How do we fix this on a Mac?
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Aug 08, 2011 11:03 am
Re: Low Application Error - Mac
By the way i'd like to add I don't recall having this problem on the previous version of MLV, but then I haven't been working with files this large for some time.
I am logging my entire drive home and yesterday it took an hour and a half.
I am logging my entire drive home and yesterday it took an hour and a half.
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Low Application Error - Mac
Is that a Low Application Memory Error?
You could start it from a terminal using the MegaLogViewer.sh file.
That will start the JVM allowing up to 1 GB of Memory.
You could start it from a terminal using the MegaLogViewer.sh file.
That will start the JVM allowing up to 1 GB of Memory.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Aug 08, 2011 11:03 am
Re: Low Application Error - Mac
How would I do this?
Where is .sh file located? Any specific sequence of commands to run it with higher ram?
The location may be obvious... I just haven't touched it since I posted.
Where is .sh file located? Any specific sequence of commands to run it with higher ram?
The location may be obvious... I just haven't touched it since I posted.
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Low Application Error - Mac
If you are using the Linux download, it will be in the same dir that MegaLogViewer.jar is in.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 108
- Joined: Mon Aug 08, 2011 11:03 am
Re: Low Application Error - Mac
I am using the native version?
I will try uninstalling and reinstalling.
I will try uninstalling and reinstalling.
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Low Application Error - Mac
You won't need to uninstall the existing one, download the Linux version and extract it to any folder, then use the .sh script to run it.
I will have to look at setting the OS X version to use large memory by default on a future version.
I will have to look at setting the OS X version to use large memory by default on a future version.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html