Sample dynopull datalog
Moderator: LT401Vette
-
- MS/Extra Newbie
- Posts: 19
- Joined: Tue Sep 08, 2015 4:17 pm
Sample dynopull datalog
Does anyone have a datalog from a dyno pull/drag pass. Preferably a good pass with lots of data. I'm a nube and learning so I just want to study a log. Be even better if I had the tune.
Thanks!
Thanks!
-
- MS/Extra Newbie
- Posts: 19
- Joined: Tue Sep 08, 2015 4:17 pm
Re: Sample dynopull datalog
Cough cough
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: Sample dynopull datalog
And the tune would need to be for a........ Pretty scant information there to fulfill your request................Sevindeess wrote:Be even better if I had the tune.
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- MS/Extra Newbie
- Posts: 19
- Joined: Tue Sep 08, 2015 4:17 pm
Re: Sample dynopull datalog
It doesn't matter what it is. I just want to review a data log of a dyno pull or a pass down the drag strip. I want the tune that was loaded in the car so I can compare the tune against the pull/run.
Re: Sample dynopull datalog
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: Sample dynopull datalog
Got it! Apparently I misunderstood your question!Sevindeess wrote:I want the tune that was loaded in the car so I can compare the tune against the pull/run.
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- MS/Extra Newbie
- Posts: 19
- Joined: Tue Sep 08, 2015 4:17 pm
Re: Sample dynopull datalog
No trouble, thanks guys. That is exactly what I was after. I'm like kid with a new toy. I testing my new skills.
-
- Super MS/Extra'er
- Posts: 2637
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Sample dynopull datalog
Heres a drag run, I miss 4th but get it back quick enough, my other 2 passes had tuning issues with traction control and some launch control tuning
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control