Lamda Target based off afr table
Moderator: LT401Vette
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Lamda Target based off afr table
Hoping to get some help with a custom field i had one made for tuner studio that worked perfect but i would know how to do the same thing to get on in mlv
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Lamda Target based off afr table
Calculated fields > Custom fields > Add Custom field.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: Lamda Target based off afr table
Got that part but i do not know the expressions for it. I guess i should have paid better attention when i was in math classslow_hemi6 wrote:Calculated fields > Custom fields > Add Custom field.
Thank you tho!
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Lamda Target based off afr table
Phil has some info on his website about the expressions. I looked it up a couple of years ago. http://www.efianalytics.com/MegaLogViewer/formulas.html
Be something like, Fied Name: AFR Target1 Formula: [afrtgt1] .
Be something like, Fied Name: AFR Target1 Formula: [afrtgt1] .
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
-
- Super MS/Extra'er
- Posts: 12731
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Lamda Target based off afr table
What are you trying to calculate?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: Lamda Target based off afr table
So I'd like to graph lamda target on mlv so I can tune using "have over what" easier without having to use my horrible math skills.
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Lamda Target based off afr table
Are you operating in Lambda or AFR for your project? Lambda for gasoline is AFR/14.7. If your project is in AFR and you want to convert then you would have a field name like "Lambda Target" and the formula would be something like [AFR Target 1]/14.7 .
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: Lamda Target based off afr table
I'm just learning but I want to learn in lamda I will try that
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Lamda Target based off afr table
You can have almost all of your project in lambda if you set it as lambda in, File > Project > Project Properties > Settings
AFR target table then becomes a lambda target table.
AFR target table then becomes a lambda target table.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: Lamda Target based off afr table
Yes but it does give me a lamda Graph on mlv. If you have actual and target it's very easy to she the percentage of fuel that needs to be remove with little to no math.
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap