Transbrake release in datalog
Moderator: LT401Vette
Transbrake release in datalog
I want to see when(time) the transbrake button was released in datalogs, I dont see it in the dropdown menu....
2000 Mustang GT 4.6 4V, MS3 Fully sequential,Twin 6466's,Glide, full fuel system 1100 WHP
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Transbrake release in datalog
I'm sure there might be a port status, but I don't know those. However, is the transbrake delayed? If not it should be when the launch button is released if launch and brake are tide together like mine
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
Re: Transbrake release in datalog
Yes they are the same thing, dont see either in mlv.
2000 Mustang GT 4.6 4V, MS3 Fully sequential,Twin 6466's,Glide, full fuel system 1100 WHP
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Transbrake release in datalog
Status 2, 8 is launch enabled. It's a bit numbering system, so you'll see additive numbers like 8 and 32 will show as 40 on the status 2 line but that's launch and spark cut togrther
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control