EGT's in Megalogviewer
Moderator: LT401Vette
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Wed Jul 06, 2016 3:37 am
EGT's in Megalogviewer
I'm at a loss trying to figure out how to set Megalogviewer so that I can see graphs for EGT, oil pressure and fuel pressure. I have the necessary hardware properly setup in TunerStudio but none are options for me in the Megalogviewer drop-down menus for any of the graphs. Anybody want to help out a newbie?
Buck
Buck
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: EGT's in Megalogviewer
Please post an msq.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Wed Jul 06, 2016 3:37 am
Re: EGT's in Megalogviewer
Oh yeah, knew I was forgetting something.....
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: EGT's in Megalogviewer
It looks to me like it should indeed be data logging EGT's.
Starting a new Data log in TunerStudio, that log does not have 4 fields: EGT1, EGT2, EGT3, EGT4?
Can you post a short log?
Starting a new Data log in TunerStudio, that log does not have 4 fields: EGT1, EGT2, EGT3, EGT4?
Can you post a short log?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Wed Jul 06, 2016 3:37 am
Re: EGT's in Megalogviewer
I just figured it out, I think. Not knowing what else to do I setup gauges on a dashboard in TS for the inputs I want to log. Now those inputs are available in MLV but when I record a new datalog and try to download it I get a "timed out" error message.
Two steps forward, one step back. At least it's progress.
Two steps forward, one step back. At least it's progress.
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: EGT's in Megalogviewer
Are you looking at regular data logs or SD logs?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Wed Jul 06, 2016 3:37 am
Re: EGT's in Megalogviewer
SD logs.
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: EGT's in Megalogviewer
That is a different animal.. Then it won't log unless you have the field selected to log..
What sort of a timeout message?
What sort of a timeout message?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Wed Jul 06, 2016 3:37 am
Re: EGT's in Megalogviewer
The message I get says:
Error downloading LOG0021.MS3
Controller Instruction failed!
Error:
Timeout after:601ms. requested timeout:600, Expected bytes:3, bytes read:0
Error downloading LOG0021.MS3
Controller Instruction failed!
Error:
Timeout after:601ms. requested timeout:600, Expected bytes:3, bytes read:0
-
- Super MS/Extra'er
- Posts: 12732
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: EGT's in Megalogviewer
With any file you try to download?
What type of connection are you using?
What type of connection are you using?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html