Hey,
In the "calculated fields" menu, there are "Wideband O2-AFR Rear" and "Wideband S2-AFR Front". I don't understand what these settings do. The lambda values are already being output in the log from the MS, so why would I want to set my wideband sensor in MLV?
Thanks,
/Patrik
MLV "Wideband" setting
Moderator: LT401Vette
-
whittlebeast
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
Re: MLV "Wideband" setting
MLV works on lots of different tuning systems. You are looking at something for motorcycles like Harleys that have O2 sensors front and rear.
Andy
Andy
Last edited by whittlebeast on Sat Feb 11, 2017 4:53 am, edited 1 time in total.
-
lutorm
- Helpful MS/Extra'er
- Posts: 146
- Joined: Sat Apr 11, 2015 2:53 pm
- Location: The island of Hawaii
Re: MLV "Wideband" setting
I know, MY thing is a motorcycle with front and rear O2 sensors...whittlebeast wrote:MLV works on lots of different tuning systems. You are looking at something for motorcycles like Harleys that have front and rear cylinder O2 sensors front and rear.
Andy
You mean this is for an ECU that doesn't output lambda but still logs the voltage from a wideband sensor?