Having issue seeing added 0-5v sesors in log

[Sleeperls]

Added two sensors under the generic sensor inputs. Gave them a source. ONe is spare adc and the other o2 2. Both have field names added etc. Burned to controller.

I can see them on my tunerstuidio dash fine, but they do not show up anywhere on megalog viewer. Im sure im missing a step somewhere.

Thanks.

Please see attached msq and log

[CRSTune]

I'm guessing you datalogged this using the SD card? You do not have those fields selected to log in the settings.

[LT401Vette]

Yes, that does look like a small subset of the available fields. Either it is from an SD card or a small set is selected in Logging Profiles.

[Sleeperls]

Yes it's from a sd card. Am I missing where to add the fields. I even asked a friend for his log today and his stuff shows up fine.

Is it under the sd card settings?

[CRSTune]

Yes

Datalogging -> SD Card Datalogging -> Log Field Selection

[Sleeperls]

That would explain it. I figured it would be in the megalog setting not tunerstudio. I'll mess with it tonight. Thanks guys