Added two sensors under the generic sensor inputs. Gave them a source. ONe is spare adc and the other o2 2. Both have field names added etc. Burned to controller.
I can see them on my tunerstuidio dash fine, but they do not show up anywhere on megalog viewer. Im sure im missing a step somewhere.
Thanks.
Please see attached msq and log
Having issue seeing added 0-5v sesors in log
Moderator: LT401Vette
-
- Experienced MS/Extra'er
- Posts: 338
- Joined: Thu Oct 20, 2016 9:12 pm
- Location: Manassas, Virginia
Re: Having issue seeing added 0-5v sesors in log
I'm guessing you datalogged this using the SD card? You do not have those fields selected to log in the settings.
I'm in the VA/DC area! Let me know if I can help you locally! I offer tuning and troubleshooting services.
http://www.msextra.com/forums/viewtopic ... 37&t=64269
Email me directly at CRSTune@gmail.com
Personal Vehicle:
'92 Nissan 240sx, KA24DET, GT2860RS, MS3X, Coil-on-Plug
http://www.msextra.com/forums/viewtopic ... 37&t=64269
Email me directly at CRSTune@gmail.com
Personal Vehicle:
'92 Nissan 240sx, KA24DET, GT2860RS, MS3X, Coil-on-Plug
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Having issue seeing added 0-5v sesors in log
Yes, that does look like a small subset of the available fields. Either it is from an SD card or a small set is selected in Logging Profiles.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: Having issue seeing added 0-5v sesors in log
Yes it's from a sd card. Am I missing where to add the fields. I even asked a friend for his log today and his stuff shows up fine.
Is it under the sd card settings?
Is it under the sd card settings?
-
- Experienced MS/Extra'er
- Posts: 338
- Joined: Thu Oct 20, 2016 9:12 pm
- Location: Manassas, Virginia
Re: Having issue seeing added 0-5v sesors in log
Yes
Datalogging -> SD Card Datalogging -> Log Field Selection
Datalogging -> SD Card Datalogging -> Log Field Selection
I'm in the VA/DC area! Let me know if I can help you locally! I offer tuning and troubleshooting services.
http://www.msextra.com/forums/viewtopic ... 37&t=64269
Email me directly at CRSTune@gmail.com
Personal Vehicle:
'92 Nissan 240sx, KA24DET, GT2860RS, MS3X, Coil-on-Plug
http://www.msextra.com/forums/viewtopic ... 37&t=64269
Email me directly at CRSTune@gmail.com
Personal Vehicle:
'92 Nissan 240sx, KA24DET, GT2860RS, MS3X, Coil-on-Plug
Re: Having issue seeing added 0-5v sesors in log
That would explain it. I figured it would be in the megalog setting not tunerstudio. I'll mess with it tonight. Thanks guys