Combining datalogs
Moderator: LT401Vette
Combining datalogs
Is there a way to combine three datalogs together so I get a better VE analysis out of it?
-
- Experienced MS/Extra'er
- Posts: 372
- Joined: Sat Dec 31, 2011 6:10 am
- Location: Netherlands
- Contact:
Re: Combining datalogs
You can select and open all three at once.
MLV will show them as one.
MLV will show them as one.
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
Re: Combining datalogs
You have to get into MLV first, then File Open and select all of the files you want top open.
See https://youtu.be/zHPlIf_ypFI?t=629
Hope this helps
Andy
See https://youtu.be/zHPlIf_ypFI?t=629
Hope this helps
Andy
-
- Master MS/Extra'er
- Posts: 548
- Joined: Fri Dec 10, 2010 4:41 pm
Re: Combining datalogs
I've been having trouble with this ever since I stuck a trip odometer on my dashboard. I get an error that the fields all have to be the same or something.
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
Re: Combining datalogs
Try updating your MLV. There was some combination a wile back that had that pop up. I think it is fixed now.
-
- Master MS/Extra'er
- Posts: 548
- Joined: Fri Dec 10, 2010 4:41 pm
Re: Combining datalogs
I'm on 4.2.02.
EDIT - odd it works fine now I must have not been updated last time I tried.
EDIT - odd it works fine now I must have not been updated last time I tried.