Combining datalogs

Questions specific to Megalogviewer

Moderator: LT401Vette

Post Reply
vw_chuck
Master MS/Extra'er
Posts: 633
Joined: Wed Dec 11, 2013 1:16 pm

Combining datalogs

Post by vw_chuck »

Is there a way to combine three datalogs together so I get a better VE analysis out of it?
BigBlockMopar
Experienced MS/Extra'er
Posts: 372
Joined: Sat Dec 31, 2011 6:10 am
Location: Netherlands
Contact:

Re: Combining datalogs

Post by BigBlockMopar »

You can select and open all three at once.
MLV will show them as one.
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
whittlebeast
Super MS/Extra'er
Posts: 2221
Joined: Tue May 04, 2004 8:20 pm
Location: St Louis
Contact:

Re: Combining datalogs

Post by whittlebeast »

You have to get into MLV first, then File Open and select all of the files you want top open.

See https://youtu.be/zHPlIf_ypFI?t=629

Hope this helps

Andy
Rick Finsta
Master MS/Extra'er
Posts: 548
Joined: Fri Dec 10, 2010 4:41 pm

Re: Combining datalogs

Post by Rick Finsta »

I've been having trouble with this ever since I stuck a trip odometer on my dashboard. I get an error that the fields all have to be the same or something.
whittlebeast
Super MS/Extra'er
Posts: 2221
Joined: Tue May 04, 2004 8:20 pm
Location: St Louis
Contact:

Re: Combining datalogs

Post by whittlebeast »

Try updating your MLV. There was some combination a wile back that had that pop up. I think it is fixed now.
Rick Finsta
Master MS/Extra'er
Posts: 548
Joined: Fri Dec 10, 2010 4:41 pm

Re: Combining datalogs

Post by Rick Finsta »

I'm on 4.2.02.

EDIT - odd it works fine now I must have not been updated last time I tried.
Post Reply