Megasquirt Support Forum (MSEXTRA)

(MLV 4.2.02)

Noticed a bug in MLV that it will start showing values with 3 decimal digits (x.000), instead of 1 (x.0), when there's a marker present in the log-file.
Before the marker, values are shown with 1 decimal.
After the marker, values are suddenly shown with 3 decimals.

Going back in the log to 'before the marker', MLV still keeps showing 3 decimals on all values.

Can you post the log you are seeing this with?

Ok, noticed a different behaviour too;

- in the first log (2017-10-14_18.40.36), only Spark advance and RPM values get 3 decimals after the marker.
The other values kPa, CLT and BattV for instance stay correct at 1 decimal.

In the other log, all values get 3 decimals after the marker (at least, the yellow line in the log, is when I cycled the ignition key off and on, for when I got in/out of the car).

I think I've narrowed it down to "Time Gap: Calculated Record".
In a log, once you scroll across that area, the 3 decimals appear and don't go away anymore in any other part of the log.