Export Loaded Log As

Questions specific to Megalogviewer

Moderator: LT401Vette

Post Reply
W126
Experienced MS/Extra'er
Posts: 153
Joined: Sun Aug 24, 2014 10:32 am

Export Loaded Log As

Post by W126 »

I've exported a log but don't see any difference compared to the original.
What does Export do, is it just copy ?
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:

Re: Export Loaded Log As

Post by kjones6039 »

If I'm not mistaken, Export is equivalent to Save As, which simply allows you to provide your own file name.

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
W126
Experienced MS/Extra'er
Posts: 153
Joined: Sun Aug 24, 2014 10:32 am

Re: Export Loaded Log As

Post by W126 »

so it's the same as copying the file ?
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Export Loaded Log As

Post by jsmcortina »

As far as I'm aware, if you trimmed the log, the Export will save that shorter trimmed version.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:

Re: Export Loaded Log As

Post by kjones6039 »

W126 wrote:so it's the same as copying the file ?
For the most part.
jsmcortina wrote:As far as I'm aware, if you trimmed the log, the Export will save that shorter trimmed version.
And that also.

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Export Loaded Log As

Post by LT401Vette »

As James said.. If you have edited the content of what is loaded, it will save what is now loaded.

So if you Trim after cursor, before cursor, etc... Those parts are gone and will not be saved.

Also your calculated fields will be saved to the new file..
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
W126
Experienced MS/Extra'er
Posts: 153
Joined: Sun Aug 24, 2014 10:32 am

Re: Export Loaded Log As

Post by W126 »

thank you Phil
Post Reply