microsquirt shift light how to ?

[turbotater]

i am wanting to add a shift light to my microsquirt.
can anyone get me started with a how to ?

thanxs

[elutionsdesign]

Programmable on/off outputs would be a good place to start.

[turbotater]

i am not sure where that is located.
I see where there is an option under the extended tab called "table switching control" and it has what looks like a place to set an rpm output but there is no reference to what pin(wire) is associated with it

[jsmcortina]

It has nothing to do with Table Switching.

The On/Off outputs are in the manual here:
http://www.msextra.com/doc/pdf/html/Meg ... 3-146.html

James

[Tbird650]

This is how I did it:

[turbotater]

thanxs for the screen shot

i am looking for what pin (wire) = PM4?

[Tbird650]

Pin 16 Accel LED ,yellow/black
http://www.microsquirt.info/uswiring.htm
http://www.megamanual.com/ms2/spare.htm
From memory pin 16 grounds the wire when it switches and I used 12v feed to a LED via a resistor.

[Manu]

hi,

if you have several outputs left you can do a multi area shiftlight with different light colors too.

cheers,
manu

[jsmcortina]

Pin 16 Accel LED ,yellow/black
http://www.microsquirt.info/uswiring.htm
http://www.megamanual.com/ms2/spare.htm
From memory pin 16 grounds the wire when it switches and I used 12v feed to a LED via a resistor.

Please only link to the current manuals.

James