Nissan Micra CG10DE Trigger problem

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Nissan Micra CG10DE Trigger problem

Postby 3FUN » Thu Jan 11, 2018 11:37 am

Hello!
Has anyone encounter this kind of CAS pattern. I really need to know what kind of wheel decoder must i use with this.
I have attached an image.
Is it even possible to work with this type of trigger/distributor?
Thanks
Attachments
26803376_10212989354382748_1895842937_n.jpg
cg10de distributor
26803376_10212989354382748_1895842937_n.jpg (62.99 KiB) Viewed 93 times
3FUN
MS/Extra Newbie
 
Posts: 7
Joined: Mon Dec 05, 2016 6:40 am

Re: Nissan Micra CG10DE Trigger problem

Postby rickb794 » Thu Jan 11, 2018 7:04 pm

I may be wrong, but I can't find any info showing that wheel pattern is supported, even on MS3.

Is there anther distributor that fits? Or can you crank trigger it?

The alternative is to modify that shutter to be a "basic trigger" (4 windows)
This is my brain on MegaSquirt!
Use only these manuals http://www.msextra.com/manuals/
Avoid the common pitfalls, Read this before start http://www.msextra.com/forums/viewtopic.php?f=101&t=65757
rickb794
Super MS/Extra'er
 
Posts: 2884
Joined: Sun Dec 21, 2008 10:28 am
Location: Portland OR

Re: Nissan Micra CG10DE Trigger problem

Postby racingmini_mtl » Thu Jan 11, 2018 7:21 pm

That would be a '4+1' wheel pattern and as far as I know there is no support for that type of pattern.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
racingmini_mtl
Super MS/Extra'er
 
Posts: 8012
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada

Re: Nissan Micra CG10DE Trigger problem

Postby 3FUN » Sat Jan 13, 2018 2:16 am

Seems that i must go with trigger wheel attached to the crank pulley with normal patter 60-2.
Thanks
3FUN
MS/Extra Newbie
 
Posts: 7
Joined: Mon Dec 05, 2016 6:40 am

Re: Nissan Micra CG10DE Trigger problem

Postby rickb794 » Sat Jan 13, 2018 3:57 pm

A 36-1 pattern would be favorable as the frequency on a 60 tooth wheel bumps up against the upper limit at high RPM.
This is my brain on MegaSquirt!
Use only these manuals http://www.msextra.com/manuals/
Avoid the common pitfalls, Read this before start http://www.msextra.com/forums/viewtopic.php?f=101&t=65757
rickb794
Super MS/Extra'er
 
Posts: 2884
Joined: Sun Dec 21, 2008 10:28 am
Location: Portland OR

Re: Nissan Micra CG10DE Trigger problem

Postby 3FUN » Sun Jan 14, 2018 9:44 am

I'll do that...thanks
3FUN
MS/Extra Newbie
 
Posts: 7
Joined: Mon Dec 05, 2016 6:40 am

Re: Nissan Micra CG10DE Trigger problem

Postby rickb794 » Sun Jan 14, 2018 10:50 am

If you're not going to rev the dog doo out of it a 60 tooth will work, in that case use what's handy.
This is my brain on MegaSquirt!
Use only these manuals http://www.msextra.com/manuals/
Avoid the common pitfalls, Read this before start http://www.msextra.com/forums/viewtopic.php?f=101&t=65757
rickb794
Super MS/Extra'er
 
Posts: 2884
Joined: Sun Dec 21, 2008 10:28 am
Location: Portland OR


Return to MS2/Extra, MS2, Microsquirt and Microsquirt module support

Who is online

Users browsing this forum: Google [Bot] and 2 guests