Question about the polyfuse on microsquirt module

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Post Reply
matt_paco
Helpful MS/Extra'er
Posts: 36
Joined: Fri Feb 09, 2018 12:06 pm

Question about the polyfuse on microsquirt module

Post by matt_paco »

Has anyone ever actually experienced the poly fuse on the micro module trip? I'm using VCC to power my max9926 vr conditioner. It can consume 5-10mA by itself, and all of the other little currents add up. I know the manual says do not exceed 25mA, just curious if anyone has had to add an additional power supply to power their supporting ICs.
Manu
Master MS/Extra'er
Posts: 723
Joined: Mon Feb 15, 2010 4:57 am
Location: Alès - France
Contact:

Re: Question about the polyfuse on microsquirt module

Post by Manu »

If there is nothing else than the max9926 and standard sensors (tps, map, clt and iat), you can power the maxx ic using vref.
I can supply, repair or upgrade Megasquirts in FRANCE.

Image
https://www.megasquirt.fr
Post Reply