Injectors stuck open

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Post Reply
bloke
MS/Extra Newbie
Posts: 2
Joined: Wed Feb 07, 2007 7:33 am

Injectors stuck open

Post by bloke »

Please help someone my injectors have suddenly decided to stick open as soon as i power up. the fuel pump starts and the injectors dump the fuel straight into the inlet and cylinders. :shock: We have checked all the wiring loom for direct shorts to ground and found nothing obvious but it only happens when the megasquirts plugged in.

im using a ms1 v2.2 green board msq .s19 files with MS squirt n spark extra on EDIS 6

the car ran fine for a while untill we changed the firing order on the injectors then it started and died out after about 10 sec of running

we have got 3 injectors per circuit

Ford Escort fitted with st24 v6 engine stock injectors
Matt Cramer
Super MS/Extra'er
Posts: 17507
Joined: Thu Apr 16, 2009 8:08 pm

Post by Matt Cramer »

If you could post a data log, I could check if this is something Megasquirt is commanding this to do. If not, check for a flyback failure.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
bloke
MS/Extra Newbie
Posts: 2
Joined: Wed Feb 07, 2007 7:33 am

Post by bloke »

im new to this so excuse me if i seem a little stupid im not using a flyback board, we disconnected the injectors and put a test light in line and found they are stuck open as i said but when i turn the engine over they pulse as normal

i will try to get a datalog for you
thanks for your time as ive just about hit a wall on this, electronics arent my strong point
Post Reply