Under the Dwell Settings Needs Changing to % menu or Battery Voltage Compensation menu, What are the recomended voltages? Should voltage 1-6 be an offset of 12v (i.e. -.5v, -1v) or are they actual voltages (i.e. 11v, 11.5v)?
If this menu is left untouched, will this hinder the dwell or just get cancelled out?
Thanks
Dwell Setting %ages
Moderators: jsmcortina, muythaibxr
-
jsmcortina
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
The defaults in there come from base MS2. The voltages are offsets +/- from 12v and the dwells +/- from the nominal dwell.
You could set everything to zero if you wanted no voltage dwell correction.
The alpha code uses a %age curve instead.
James
You could set everything to zero if you wanted no voltage dwell correction.
The alpha code uses a %age curve instead.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".