help with configurations of ms-II extra 1.0.2

rs turbo · Post by **rs turbo** » Tue Nov 20, 2007 2:47 am

hi to all
can someone send me a config file for 36-1 triger with one coil please?

i have sterted the car but it's working on two cyl instade of 4 and i can figure what i did wrong

regards

Post by **jsmcortina** » Tue Nov 20, 2007 4:00 pm

It depends where your missing tooth and VR sensor are placed.

Please post your existing MSQ and we'll try to help.

James

rs turbo · Post by **rs turbo** » Wed Nov 21, 2007 1:01 am

thanks i will post

the wheel is placed on the crank and the sensor is placed like the instructions

how can you exspalin that the engine is runing with the ms1-extra it's only configuration problem

Post by **jsmcortina** » Wed Nov 21, 2007 8:55 am

I can't explain it until you post your existing settings !

James

rs turbo · Post by **rs turbo** » Sat Nov 24, 2007 7:59 am

sorry for the delay but that is my settings file
ms2 extra 1.0.2 36-1 with one coil

regrds

Post by **jsmcortina** » Sat Nov 24, 2007 8:18 am

The only setting that I can immediately see out of place is that on "More Engine Constants" you need "Primary Ignition Load" set to "Speed Density"

Nothing else appears to be wrong.

Are all four injectors working?

Is it repeatable which plugs are firing?

Is the timing right (confirmed with strobe)

James