Injector duty cycle drop out, can see in AFR too, help
Posted: Sat Apr 16, 2011 10:34 pm
Hi all,
I have a data log from the drag strip. I see a goofy drop out in my injector signal. The scary thing is, I can see the AFR return a lean spike so its real but why. This is not good at all, I need to get knock set up to see if it would retard. I have v3.57 MS2 extra 2.0.1 (i know its old) running 95lb/hr injectors on the fly back. Also what it Bit 8, it flashes yes some times in the data log. Scared to throttle my car but its soo fun its hard not to.
Any ideas? Thanks!
I have a data log from the drag strip. I see a goofy drop out in my injector signal. The scary thing is, I can see the AFR return a lean spike so its real but why. This is not good at all, I need to get knock set up to see if it would retard. I have v3.57 MS2 extra 2.0.1 (i know its old) running 95lb/hr injectors on the fly back. Also what it Bit 8, it flashes yes some times in the data log. Scared to throttle my car but its soo fun its hard not to.
Any ideas? Thanks!