ms2 sequential questions

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

ChevytoyR1
Master MS/Extra'er
Posts: 443
Joined: Mon Oct 27, 2008 12:15 am
Location: Los Angeles, CA

Re: ms2 sequential questions

Post by ChevytoyR1 »

ok jean i think i fixed it by putting a 1k resistor from pin 16 to the center leg of q2 now my sequential works on the 2nd trigger pin.. thats correct right?
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: ms2 sequential questions

Post by racingmini_mtl »

That's correct but that should be what R24 does. So either R24 has a cold solder or has failed (not very likely) or there is a damaged trace on the board.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
ChevytoyR1
Master MS/Extra'er
Posts: 443
Joined: Mon Oct 27, 2008 12:15 am
Location: Los Angeles, CA

Re: ms2 sequential questions

Post by ChevytoyR1 »

thats what i figured.. well it works now lol so im happy.. thanks for the help jean
Post Reply