ms2 sequential questions
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 443
- Joined: Mon Oct 27, 2008 12:15 am
- Location: Los Angeles, CA
Re: ms2 sequential questions
ok jean i think i fixed it by putting a 1k resistor from pin 16 to the center leg of q2 now my sequential works on the 2nd trigger pin.. thats correct right?
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: ms2 sequential questions
That's correct but that should be what R24 does. So either R24 has a cold solder or has failed (not very likely) or there is a damaged trace on the board.
Jean
Jean
-
- Master MS/Extra'er
- Posts: 443
- Joined: Mon Oct 27, 2008 12:15 am
- Location: Los Angeles, CA
Re: ms2 sequential questions
thats what i figured.. well it works now lol so im happy.. thanks for the help jean