Page 1 of 1
MS2/Extra 3.2.4 beta released
Posted: Tue Jun 26, 2012 2:37 pm
by jsmcortina
3.2.4 is released with some bugfixes over 3.2.3
As per 3.2.3, TunerStudio > 1.51 is REQUIRED. Versions 1.00x will not work. Auto-update should handle this for you or go to
http://www.efianalytics.com/TunerStudio/
Changes since 3.2.3
When mis-syncing at low rpms, dwell could be miscalculated causing spark hang-on.
Clear MAP sample error every 1 second
Dwell/discharge balancing
Rationalise adv_offset(triggerOffset) greying and usage and make it work like MS3.
All users of 3.2.x are encouraged to upgrade. Pending feedback, this release should be promoted to "release" soon.
Download the zip from:
http://www.msextra.com/doc/ms2extra/fil ... 4_beta.zip
James
Re: MS2/Extra 3.2.4 beta released
Posted: Thu Jun 28, 2012 1:26 am
by Peras
Gave it a shot last night, drove around 50km, works well
MS2/Extra 3.2.4 beta released
Posted: Thu Jun 28, 2012 3:03 am
by gslender
Hi James,
Where does this release sit compared to the Alpha 4 and upcoming Alpha 5 ?
G
Re: MS2/Extra 3.2.4 beta released
Posted: Thu Jun 28, 2012 6:23 pm
by pmbrunelle
Dwell/discharge balancing
Is this in reference to the issue mentioned here:
http://www.msextra.com/forums/viewtopic ... 91&t=45125
Re: MS2/Extra 3.2.4 beta released
Posted: Thu Jun 28, 2012 7:30 pm
by Gokart
gslender wrote:Hi James,
Where does this release sit compared to the Alpha 4 and upcoming Alpha 5 ?
G
Now I get confused with several updated firmwares.
Alpha series have more features and I consider 3.2.x to be outdated but
3.2.x are updated and the alpha are just left behind.
Re: MS2/Extra 3.2.4 beta released
Posted: Thu Jun 28, 2012 8:49 pm
by 87quest-TSI
Gokart wrote:gslender wrote:Hi James,
Where does this release sit compared to the Alpha 4 and upcoming Alpha 5 ?
G
Now I get confused with several updated firmwares.
Alpha series have more features and I consider 3.2.x to be outdated but
3.2.x are updated and the alpha are just left behind.
This may help you.
http://www.msextra.com/doc/ms2extra/upg ... #codephase
Re: MS2/Extra 3.2.4 beta released
Posted: Mon Jul 09, 2012 4:48 am
by chacaman
Upgrade from 3.2.1 to 3.2.4 FeedBack
Upgrade process:
Power on MS-II(EMS) using JimStim
export VE/Spark Table
Upgrade Firmware
Import VE/Spark Table
setup all from 0
Engine Workg Great, Sweet and Smooth
Only one Issue in my case:
i am using fan output the fan always stay ON
i made the next test:
1 - test
Engine Temp = 86C in the test moment
Enale = YES
Port = PT6 IAC1
Power On Value = 0
Tirgger Value = 1
Coolant = > 87.00
Hystrisys = 4.0
Result: Fan Always on
2 - test
Engine Temp = 82C in the test moment
Enable = NO
Port = PT6 IAC1
Power On Value = 0
Tirgger Value = 1
Coolant = > 87.00
Hystrisys = 4.0
Result: Fan Always on
3 - test
Engine Temp = 78C in the test moment
Enable = no
Port = PT6 IAC1
Power On Value = 0
Tirgger Value = 0
Coolant = > 0.0
Hystrisys = 0.0
Result: Fan Always on
Re: MS2/Extra 3.2.4 beta released
Posted: Mon Jul 09, 2012 4:58 am
by jsmcortina
Just load your existing MSQ into the new firmware, all the settings should come across ok.
James
Re: MS2/Extra 3.2.4 beta released
Posted: Mon Jul 09, 2012 9:04 am
by chacaman
all ready load and the same issue the fan stay on all time
Re: MS2/Extra 3.2.4 beta released
Posted: Mon Jul 09, 2012 9:21 am
by jsmcortina
Swap back to the previous firmware and see if the issue persists.
James
Re: MS2/Extra 3.2.4 beta released
Posted: Mon Jul 09, 2012 1:01 pm
by chacaman
i have the same issue
but now turn off and turn on
what i have to check ? mmmm the 2N2222A is bad ?
Re: MS2/Extra 3.2.4 beta released
Posted: Fri Aug 03, 2012 12:44 pm
by aaronc7
This one still looking to be the next "release" version?
Re: MS2/Extra 3.2.4 beta released
Posted: Sat Aug 04, 2012 4:40 am
by jsmcortina
aaronc7 wrote:This one still looking to be the next "release" version?
That's the plan, I've been busy on other things and haven't "pushed the button".
James