VE table question
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 13
- Joined: Tue Feb 19, 2008 5:20 am
- Location: Brisbane, Australia
VE table question
I'm currently running MS2 BG firmware 2.884, Are there any later versions of firmware that have a 16x16 VE table instead of the 12x12?
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: VE table question
The MS2/Extra code has had that for a long time. If you want to stay with the B&G code you should ask on the msefi forum.
Jean
Jean
-
- MS/Extra Newbie
- Posts: 13
- Joined: Tue Feb 19, 2008 5:20 am
- Location: Brisbane, Australia
Re: VE table question
I new extra did, thanks didnt realise i was on the wrong forum.
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: VE table question
Or switch to MS2/Extra and join the crowd.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".