VE table question

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Post Reply
turbodrift
MS/Extra Newbie
Posts: 13
Joined: Tue Feb 19, 2008 5:20 am
Location: Brisbane, Australia

VE table question

Post by turbodrift »

I'm currently running MS2 BG firmware 2.884, Are there any later versions of firmware that have a 16x16 VE table instead of the 12x12?
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: VE table question

Post by racingmini_mtl »

The MS2/Extra code has had that for a long time. If you want to stay with the B&G code you should ask on the msefi forum.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
turbodrift
MS/Extra Newbie
Posts: 13
Joined: Tue Feb 19, 2008 5:20 am
Location: Brisbane, Australia

Re: VE table question

Post by turbodrift »

I new extra did, thanks didnt realise i was on the wrong forum.
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: VE table question

Post by jsmcortina »

Or switch to MS2/Extra and join the crowd.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply