MS2/Extra firmware 3.4.4 released - use this
Posted: Fri Jul 10, 2015 2:13 pm
The current release MS2/Extra firmware for Meqasquirt-2 and Microsquirt is 3.4.4 (superceding 2.1.0d/e, 3.1.1, 3.2.5, 3.3.3, 3.4.0, 3.4.1, 3.4.2 and 3.4.3)
This should be used for all new installs.
Users of the pre-3.4 development codes are encouraged to upgrade as the development beta codes will no longer be supported.
Existing users of older releases may optionally upgrade, but if your install is running well, you may choose to leave it alone.
Download this code from http://www.msextra.com/downloads
Be SURE to read the RELEASE-NOTES.txt file included within the zip.
Find MS2 manuals at http://www.msextra.com/manuals/ms2manuals
Find upgrade notes and installation instructions in the Setting Up manual.
TunerStudio 3.0.x or later is required.
This should be used for all new installs.
Users of the pre-3.4 development codes are encouraged to upgrade as the development beta codes will no longer be supported.
Existing users of older releases may optionally upgrade, but if your install is running well, you may choose to leave it alone.
Download this code from http://www.msextra.com/downloads
Be SURE to read the RELEASE-NOTES.txt file included within the zip.
Find MS2 manuals at http://www.msextra.com/manuals/ms2manuals
Find upgrade notes and installation instructions in the Setting Up manual.
TunerStudio 3.0.x or later is required.