Can't input injector size
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Can't input injector size
Hey guys in very new to this. I'm having trouble inputting my injector flow rate and compression ratio. Those values are greyed out. I'm running a microsquirt. Sorry if this is a dumb question, any help is appreciated.
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Can't input injector size
Perhaps upgrade to the current version of the MS2/Extra firmware and take it from there?
Manuals: http://www.msextra.com/manuals/ms2manuals/
Firmware Downloads: http://www.msextra.com/downloads
James
Manuals: http://www.msextra.com/manuals/ms2manuals/
Firmware Downloads: http://www.msextra.com/downloads
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
How do I find out what firmware I currently have? Sorry again for the dumb questions. Im a newb
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Can't input injector size
See the "Forum help page" or "Read help page here"
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
I just purchased the Microsquirt brand new a week ago. Should I still need to update my firmware? I would assume being brand new it would have the latest firmware
Re: Can't input injector size
Suppliers are urged to ship with the latest firmware, but i'm under the impression that rarely happens.
It's something you need to be familiar with anyway, as there are fixes might related to you on each update - So read the manuals, firmware change logs, and see what you figure out.
It's something you need to be familiar with anyway, as there are fixes might related to you on each update - So read the manuals, firmware change logs, and see what you figure out.
Toyota JZX90 Mark II drifter
1JZ-GTE, 12+1 on MS3x, 6x LS7 D514's, 510cc, all stock sensors
1JZ-GTE, 12+1 on MS3x, 6x LS7 D514's, 510cc, all stock sensors
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Can't input injector size
That should be MS2/Extra 3.4.0 if bought from us. Some suppliers ship with B&G code, though. Can you post a copy of your tune file?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
I bought it from efisource on ebay. Here is a link to it: http://www.ebay.com/itm/111405238213?_t ... EBIDX%3AIT
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
Ill post a copy of my file tune when I get off work today. thanks for all your guys help BTW
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Can't input injector size
No idea what EFI Source uses as their default firmware, sorry.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
No problem, I will try to update later. Hopefully I dont mess it up worse lol
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
ok sorry guys im totally lost, I downloaded the updated version from the link you posted but now what do I do? I have no clue how to update my microsquirt. I know the bootloader wire has something to do with it but beyond that im totally lost. I tried googling it but I cant figure it out. Im pretty computer illiterate as well if that helps
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
it says I have version MS II REV 3.83
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Can't input injector size
If you look at the top of this page you'll see a link called Manuals.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- MS/Extra Newbie
- Posts: 20
- Joined: Mon Aug 17, 2015 6:46 pm
Re: Can't input injector size
Thank you, I acutally found a good tutorital over at DIY Autotune and was able to load the newer version 3.4.0 I should be all set now. Thank you all