Zetec base map need please
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon Jun 27, 2016 4:22 am
Zetec base map need please
Hi all
I've mess up my base map, as my computer was
Cleared , have any got a base map for a black top
Zetec with throttle body
Thanks warren
I've mess up my base map, as my computer was
Cleared , have any got a base map for a black top
Zetec with throttle body
Thanks warren
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Zetec base map need please
What exactly have you lost?
If you have a running engine then the tune is still there and working in the Megasquirt and you can easily retrieve it.
James
If you have a running engine then the tune is still there and working in the Megasquirt and you can easily retrieve it.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon Jun 27, 2016 4:22 am
Re: Zetec base map need please
Hi,
The engine won't run at all, I think what happened after
The computer was fixed I connected back up to MS
And it changed the base map and now won't run, and when I turn it over there no spark at the plugs.
The engine won't run at all, I think what happened after
The computer was fixed I connected back up to MS
And it changed the base map and now won't run, and when I turn it over there no spark at the plugs.
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Zetec base map need please
Oh, that's unfortunate, sounds like you told TunerStudio to wipe out your tune.
Best to read the manuals starting with the Setting Up manual.
James
Best to read the manuals starting with the Setting Up manual.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Zetec base map need please
You might be able to find a a saved msq in your project folder.
Better to learn the settings than to trust another's msq.
Better to learn the settings than to trust another's msq.
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon Jun 27, 2016 4:22 am
Re: Zetec base map need please
Hi
I've looked, the folder was deleted so I installed
A new one, is the set up easy to do ?
I've looked, the folder was deleted so I installed
A new one, is the set up easy to do ?
Re: Zetec base map need please
Yes since you had a running setup you can start with a default msq and just adjust settings as needed for your system, auto tune will take care of the fuel table.
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon Jun 27, 2016 4:22 am
Re: Zetec base map need please
Hi
I did have it running before, the map was already set up
In the car, now it won't turn over, you think the default maps would be good enough to start with
I did have it running before, the map was already set up
In the car, now it won't turn over, you think the default maps would be good enough to start with
Re: Zetec base map need please
The default tables will get it running, but you have to calibrate sensors set ReqFuel and other injector parameters. You also have to configure crank postion capture parameters and ignition output settings. It's not complex, just work on one area at a time. Read and print out the sections of the manual that apply to your setup and it tells you what settings to use. You can also use the ? in Tuner Studio for settings help.
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
-
- MS/Extra Newbie
- Posts: 5
- Joined: Mon Jun 27, 2016 4:22 am
Re: Zetec base map need please
Thanks I got it started after a while of trying,
When I take the car for a run it backfires quite
A bit maybe over fueling ?
When I take the car for a run it backfires quite
A bit maybe over fueling ?
Re: Zetec base map need please
This sort of mishap haunts my dreams so I have all my files backed up on two computers and the cloud.
Re: Zetec base map need please
If you have a wide band O2 installed you can use auto tune to get it dialed in better.
If the plugs are blackened use a propane torch to burn off the carbon.
If the plugs are blackened use a propane torch to burn off the carbon.
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.