cam timing tooth timing
Moderators: jsmcortina, muythaibxr
cam timing tooth timing
This must have been asked in many times before. But I couldn't find any. Is it okay if cam tooth is at the end of intake stroke? Approx 4 - 6 teeth before missing teeth with 36-1 wheel. Depending if read falling or rising.
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: cam timing tooth timing
The one spot that isn't allowed is having the active edge fall in the missing tooth gap. Anywhere else is OK.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: cam timing tooth timing
Thanks