Been searching and can't find anything.
Also tried searching through the hardware manual.
I'm trying to work out whether I can log fuel pressure on my MS2 V3.
I'm currently running Baro and Knock inputs outside the normal ones.
I'd be happy to get rid of the knock sensor from the ECU and use that input if it's usable for fuel pressure.
Is there any doco on this though? Am I looking in the wrong manual?
Logging fuel pressure
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 4122
- Joined: Fri May 07, 2004 3:33 am
- Location: Australia
Re: Logging fuel pressure
It would have to come in on adc6 or adc7 and then use the custom channel editor on tuner studio to configure it.
Find the Manuals up top under Quick links: Manuals.
Cheers Luke
Cheers Luke
-
- Super MS/Extra'er
- Posts: 1275
- Joined: Thu Apr 07, 2005 11:23 pm
- Location: Sydney, Australia
- Contact:
Re: Logging fuel pressure
Found it! Page 32 of the manual.
Ok, so I will ditch Knock input and use that for fuel pressure.
Ok, so I will ditch Knock input and use that for fuel pressure.
-
- Super MS/Extra'er
- Posts: 1275
- Joined: Thu Apr 07, 2005 11:23 pm
- Location: Sydney, Australia
- Contact:
Re: Logging fuel pressure
Got it sorted for tunerstudio and tested good with stim.
Does anyone know if the extra channels can be configured in either MSDroid or Shadowdash?
I couldn't see anything under the tools area in MSDroid.
Does anyone know if the extra channels can be configured in either MSDroid or Shadowdash?
I couldn't see anything under the tools area in MSDroid.