Take a look at my AFR table. EGO correction and such

[WillExoIX]

While I am waiting on some replies in my other thread, I have roughed in an AFR table. Though I'm not going to use it yet, I would just like some feedback on it.

Also what are good settings for EGO correction when I do decide to enable it after getting the VE table smoothed out. The VE table is really rough at the moment, and Ive really only dealt with a few areas on it. WOT pulls at 20psi are at 11.0:1 AFR, and I have the car backed down to 16psi currently. I'm trying to get deadtime squared away and once thats done I'd like to start completing the tune, and this would be a fairly large part of it.

Thanks in advance.