Hi, im setting up my launch control and nitrous control input circuits and have a question regarding the resistor size for the 5v portion of the "ground input switch"
the d schematic bekow shows to use a 2.2k resistor but the newer ms2 hardware manual shows a 1k..
i already bought 2.2k will it still work fine? thank you for any input.
Ground switch input resistor question for launch/nitrous
Moderators: jsmcortina, muythaibxr
-
Boostedbrick
- Helpful MS/Extra'er
- Posts: 47
- Joined: Wed Oct 05, 2016 3:43 pm
-
racingmini_mtl
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: Ground switch input resistor question for launch/nitrous
Yes.Boostedbrick wrote:i already bought 2.2k will it still work fine?
-
Boostedbrick
- Helpful MS/Extra'er
- Posts: 47
- Joined: Wed Oct 05, 2016 3:43 pm
Re: Ground switch input resistor question for launch/nitrous
thank you sir. One more question im hoping you can ask, the FIDLE output, on my nitrous relay would that be a ground or power trigger for the relay?racingmini_mtl wrote:Yes.Boostedbrick wrote:i already bought 2.2k will it still work fine?
-
hybrid
- Super MS/Extra'er
- Posts: 1275
- Joined: Thu Apr 07, 2005 11:23 pm
- Location: Sydney, Australia
- Contact:
Re: Ground switch input resistor question for launch/nitrous
GND.
Do not load someone elses tune and expect it to work for you!
-
Boostedbrick
- Helpful MS/Extra'er
- Posts: 47
- Joined: Wed Oct 05, 2016 3:43 pm
Re: Ground switch input resistor question for launch/nitrous
ok great, thanks!hybrid wrote:GND.
Re: Ground switch input resistor question for launch/nitrous
Got to ask - "BoostedBrick" - would that be a BMW K series bike, or ......?
1983 BMW R100RT Motorbike
Turbocharged - Water/Meth
Sequential Ignition & Fuel
"Perky Sleeper" that excites bike enthusiasts once discovered (or being passed)
Newest project - 1995 BMW K75 is V3 Microsquirt, "Turbocharger - Of Course"
Turbocharged - Water/Meth
Sequential Ignition & Fuel
"Perky Sleeper" that excites bike enthusiasts once discovered (or being passed)
Newest project - 1995 BMW K75 is V3 Microsquirt, "Turbocharger - Of Course"
-
Boostedbrick
- Helpful MS/Extra'er
- Posts: 47
- Joined: Wed Oct 05, 2016 3:43 pm
Re: Ground switch input resistor question for launch/nitrous
No, it's a Volvo wagon, we call them "bricks" cause there built like tanks and are square hahaR100RT wrote:Got to ask - "BoostedBrick" - would that be a BMW K series bike, or ......?