Hey guys.
I'm trying to convert a 1uz from dual distributor to wasted COP, with a microsquirt.
I know I'm supposed to use A and W led to ground vref through a resistor but I'm not sure if I need to reflash or if it just knows to use those outputs when I select Wasted COP for a v8.
I know LS1 guys do this often, I'm still a little hazy on the details.
Microsquirt V8 COP wasted spark for 1UZ
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 8
- Joined: Tue Aug 25, 2015 9:42 pm
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: Microsquirt V8 COP wasted spark for 1UZ
Wasted cop will use 8 outputs to fire 8 coils in waste pairs, which isn't available on Micro.
You can wire them in pairs using the four channels (ign1/2, and aled and wled w pullup). Once set to waste spark and 8cyl it knows to use four outputs.
You can wire them in pairs using the four channels (ign1/2, and aled and wled w pullup). Once set to waste spark and 8cyl it knows to use four outputs.
Re: Microsquirt V8 COP wasted spark for 1UZ
Did you get this figured out?