Hi! im having issues with launch control retard. Its set -25º but, its only goes to 16º??..
Someones know the problem?
thanks!!
Launch control dont retarding
Moderators: jsmcortina, muythaibxr
Launch control dont retarding
- Attachments
-
- no carga.msl
- (224.18 KiB) Downloaded 13 times
-
- msq golcito.msq
- (90.56 KiB) Downloaded 20 times
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Launch control dont retarding
The way your tach input is setup, with a trigger at 15BTDC you won't ever get advance less that 16 degrees. That's how it works. Please see this page in the manual and pages before and after.
http://www.msextra.com/doc/pdf/html/MS2 ... 4-104.html
James
http://www.msextra.com/doc/pdf/html/MS2 ... 4-104.html
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Launch control dont retarding
Got it! So i Will configure like the manual says, going to 60btdc at trigger wizard and sincronize again the timing with the distributor! Thanks!jsmcortina wrote:The way your tach input is setup, with a trigger at 15BTDC you won't ever get advance less that 16 degrees. That's how it works. Please see this page in the manual and pages before and after.
http://www.msextra.com/doc/pdf/html/MS2 ... 4-104.html
James
Enviado desde mi MotoE2(4G-LTE) mediante Tapatalk